With the Koolkut's smooth running, due to the exceptional quality of the bearings, it is important that your machine is levelled up accurately on installation, to avoid problems with the saw running down to one end when in use.

Your Koolkut's feet have provision for 10mm bolts to aid the process of levelling. The bolts should be used to set the machine perfectly level, the spaces under the saw's feet packed and the bolts then removed and discarded.

Sagetech can put you in contact with specialists who can install and align your Koolkut for you. The company cannot, however, be party to any contract between you and any installation engineer, and makes no recommendations. To find out more about this option, click here to contact us.

*These levelling bolts are not supplied with the machine.

Return to the FAQs page